Is your Netgear router blinking red light? Are you worried about it? If yes, you have come to the right destination. Also known as the Netgear router internet light amber issue, the red light issue is pretty common. You might have to make a few changes to your home WiFi network to get rid of the red light issue. We understand things are overwhelming for you. So, without taking much of your time, let us show you the right path to resolve the Netgear router internet light amber issue. Read on.
But, before we jump on to troubleshooting tips, let’s first explore the common reasons behind the red light issue. Otherwise, you can’t mend the problem in the future. Keep reading.
Reasons: Netgear Router Red Light Issue
Inconsistent Internet Connection
If your Netgear router is not receiving a proper internet connection, the red light will start blinking. Hence, inconsistent WiFi or wired connection can result in the same.
Unstable Power Supply
A poor power supply is one of the most common reasons behind the router red light issue. Why? Well, without a proper power supply, the device will keep rebooting. Hence, it won’t be able to sustain a strong and stable connection.
So, these were the two reasons which will not even permit you to do Netgear router login. Hence, the quest to resolve the matter at hand becomes outrageously important. Let us guide you through the following troubleshooting tips. Read on.
Troubleshooting Tips to Resolve Red Light Issue
Check Power Socket
Without a proper power supply, your router might keep rebooting. If that happens, the device can’t sustain a stable internet connection. Therefore, the red light blinking issue becomes a recurring event. So, to resolve the matter, you need to first ensure that the power socket being used is in the best possible working condition.
We advise you to check for signs of short-circuiting. In case you have been using a power supply cable or extension cord, you must check it first. Ensure that there are no cuts or worn out. If that is the case, you must get it replaced with a new one.
Move Devices Closer
To provide Netgear router access to the internet, it should be connected to the host modem. Therefore, the connection type has to be perfectly strong. Since most users don’t want to entangle themselves in Ethernet cable connection, wireless mode of connection is preferred more. However, the issue arises when the distance is not kept in check.
If you face a router red light issue, you should move connecting devices closer to each other. But, make sure they are not too close. Rather, you need to hit the sweet spot during router placement. The best way to do that is by knowing the modem’s range.
We covered the power supply issue above. However, there is yet another perspective to this error. What if your locality has a power outage issue? It means your house does not receive a stable and consistent power supply from the backend. There is constant fluctuation in the electricity being supplied to your Netgear router and other devices.
Well, in that case, you should install a UPS. It eradicates the fluctuations in the power supply to your house. Hence, you don’t have to worry about ICs getting damaged because of the fluctuations in the network.
Change Connection Types
What if the connection type you have been using is not offering the best WiFi signal coverage? Well, it happens when there are WiFi interferences. It is pretty common when you are using a wireless connection. Hence, you will experience red light issue on your Netgear router.
To tackle this, you need to change the connection type on your device. Instead of using a wireless connection, you need to connect the devices using a cable. The Ethernet cable at use must be in decent shape and must not have any cuts as well. Run a speed test by doing Netgear router login after changing connection types.
In a few cases, there are internet connection errors from the backend. That is, the server side is down. It means your Netgear router won’t receive proper WiFi signals. Hence, getting in touch with your ISP might help you out. Just ensure that your device receives stable internet and power supply.
When you do that, you can easily mend the Netgear router red light issue. You get to use your home WiFi network without any hassle.